Why Is My Epson Printer Printing Blank Pages?

The first thought I had when I saw a blank page in my printer’s feeder tray was, “What did I do wrong?” When you open an ink cartridge, there should always be a small piece of black paper inside. If you don’t see any, you probably didn’t replace the cartridge correctly and needed to do so immediately.

You shouldn’t leave the ink cartridge inside your printer for more than 24 hours after you replace the ink. Also, ensure you have no water or other liquids near the cartridges. These can cause problems. If all else fails, check the print quality settings on your device. Sometimes, these get stuck, causing a problem. This is something you can fix by resetting them.

To do this, go to Settings>Epson Printer Setup and scroll down until you find the Print Quality option. There, you’ll have several options to choose from, including high-quality. To print any document, you require a printer. When your printer stops working, it has reached the end of its life. You may also experience other problems with your printer, which might prevent it from functioning correctly. If so, then you need expert advice to fix those issues properly.

Why Is My Epson Printer Printing Blank Pages?

Why Is My Epson Printer Printing Blank Pages?

Your nozzles could clog and cause a blank printing problem if you have not been using the printer in a long time or if you ignore the low ink warning. Epson printers have built-in features to clean nozzles in one or two cycles. So you can use them to solve the problem.

Fixing a broken Epson Printer

There could be many reasons behind these problems, like improper use or installation of your device. So the next thing is to replace all components one by one.

Replacing ink cartridge

If there is no response from the printer, you can check whether the cartridges have been installed correctly. First, remove the ink cartridge, place it in a horizontal position, and ensure that the power cord is connected well.

Replace the ribbon rollers

The replacement process should be done before replacing the black and white rollers. To do this:

  1. Take the paper from the feed tray and see the two rollers on either side of the printer.
  2. Open the cover, and you will find the ribbon rollers.
  3. Press them gently to remove the old ones and then install the new ones.

Replacing the fuser roller assembly

In case your fuser is not working correctly, then it will cause the printer to stop printing. First, unplug the printer, open the cover, and pull it out completely. Then hold it up to a solid light to identify the problem. Once you know the issue, repair it using a screwdriver.

How to Reset the printer settings?

How to Reset the printer settings?

You might have forgotten some basic settings for your device. If you want to reset those settings, then follow these steps:

Step 1: Uninstall and reinstall your printer software.

To uninstall the printer driver, connect the USB cable to the computer and type “Epson” in the search box. After that, click on the Epson Driver option to start the uninstallation.

Afterward, restart your PC and then insert the CD into the drive. In the next step, select your preferred language and then press the OK button.

Please choose the correct printer model and save it onto the hard disk.

Next, turn off the laptop or computer and reconnect the USB cable.

Step 2: Download and run the updated version of the printer drivers.

Once the installation is complete, you can download the latest version from the official website. Then, open the browser and navigate to the printer manufacturer’s site.

On the left, you will find the ‘Download’ section, with an option for downloading the drivers.

Thing That Strikes Your Mind 

Thing That Strikes Your Mind 

The first thing that strikes your mind when you start working with a new printer or any other device is how to use it. If this question hits you, don’t worry, as I am here to help you.

Printers these days have many advanced features, but their usage is lacking. There are many reasons behind a printer’s non-functioning; one could be paper jamming.

This happens because the ink cartridge gets dry, so the print head does not move over the page anymore. But you will never know until the end. So, let me tell you what you need to do before the situation goes beyond your control.

If your ink cartridges are already empty, then it is time for you to replace it. You can buy it from Amazon or any local store.

You should also check whether the ribbon or the rollers have become damaged. This can be quickly done by matching its color; it will turn black if the quality of the ribbon has gone down. In that case, you should change it immediately. It will also happen when something stuck in the machine stops it from printing.


So many people waste a lot of money on ink and toner because they don’t know how to use them. I hope this post has helped you out. Now, enjoy using the printer without facing any difficulty.

Leave a Comment